A Comprehensive Guide On How To Do Asus Router Port Forwarding

Asus is a popular manufacturer of electronic products like laptops, desktops, routers. Asus routers keep your home network secure from the unauthorized connections. If this function restricts you to use an online program or games, then you need to fix this by following the instructions discussed in this article. This article will teach you the overall Asus router port forwarding process. By going through these instructions below, you can be able to unblock the connections, which you want to use.

Port forwarding is a process which helps the routers to enable remote access to devices such as IP cameras, etc. As most of the routers have a firewall enabled which restricts the outside internet traffic to enter the local network. Though this is not an easy procedure yet you can easily learn it from the below steps of this article.

Learn How to Port Forward Asus Router:

The steps of how to open ports on the Asus router is very simple and are as follows.

Step 1: Open Your Asus Router Account

At first, open the Command Prompt window and type ipconfig on it. Then, hit on the Enter button to know the IP address of your Asus router. After hitting on the Enter button, you will see different messages appear on this Command Prompt window. Among these messages, the number along with dots beside to the Default Gateway section is your router’s IP address. This IP address is required to open the Asus login page.

Now, launch a preferred browser on your system. Go to the address bar of it, type the IP address, which you get beside to the Default Gateway from the Command Prompt window. Then, hit on the Enter button. This will open the login page of the Netgear router. Now, fill up the username and password boxes with the proper details. If you have ever changed the username and password, then use those details only. Otherwise, use the default username and password of the Asus router on these blank spaces accordingly. After that, click on the “Log In” box from this window, to open your Asus account. Now, proceed to these further steps to continue the Asus router port forwarding process.

Default username: admin

Default password: admin/password

Step 2: Enable Port Forwarding On Asus Router

From the left-hand side panel of your Asus account, click on the WAN option, which is under the Advanced Settings section. After that, from the right-hand side opening window tap on the “Virtual Server/ Port Forwarding” tab. Then, under the Basic Config section, activate the “Yes” option besides to Enable Port Forwarding.

Steps To Set Up Asus Router Port Forwarding For A FTP Server:

To start the port forwarding for an FTP server, at first, click on the drop-down box beside to Famous Server List. Then, select the FTP option from the list. In doing this, you will see at the below portion of this window, Port Forwarding List section gets open. Here, you need to fill the Asus router port forwarding range for the FTP server. After that, select the Local IP by dropping down the menu arrow. 192.168.1.103 is an example of the Server LAN IP address. Next, click on Edit and tap on the Apply box.

It is better not to set the port range to 20:21 while using the FTP server, in the presence of the AiDisk service on the Asus router.

Asus Router Port Forwarding Source Target

There are several things you need to perform to forward the source IP address to the match port, which is as follows.

1. a) For the Source IP address, keep the space empty.
2. b) Either fill up with the IP address which is specific. 192.168.122.1 is an example of such IP address.
3. c) Place the IP address inside one subnet or to the similar IP pool.

Verifying Steps to Confirm the Asus Router Port Forwarding for A FTP Server is Done Successfully

To verify the status of the FTP server, you need to open a PC without using the same LAN. But an internet service must be connected to that PC also except the Asus router. Using this PC, open the router’s WAN IP. After that, launch an FTP browser on your system to check if the FTP server works after following the port forwarding process.

Know How to Set Up Asus Router Port Forwarding for an HTTP Server:

To perform this task of enabling the HTTP server which not works earlier, follow these below steps.

After reaching to the Virtual Server / Port Forwarding tab by following the above instructions, continue these below lines to activate the HTTP server which is restricted by the Asus router.

• Below the Virtual Server / Port Forwarding tab, navigate to the Basic Config section
• Click on the drop-down menu box, beside to Famous Server List.
• Now, from this menu list, choose the HTTP option.
• Then, set a port range for the HTTP server on the menu list which gets open in the below portion of this window.
• Next, select the Local IP as well. 192.168.1.103 is an example of the Server LAN IP address.
• Then, select on Edit and hit on the Apply box.

Asus Router Port Forwarding Source Target

The instructions to forward the IP address to match the port is as follows.

1. a) For the Source IP address keep the space empty.
2. b) Either fill up with the IP address which is specific. 192.168.122.1 is an example of such IP address.
3. c) Place the IP address inside one subnet or to the similar IP pool.

Verifying Steps to Confirm the Asus Router Port Forwarding for an HTTP Server is Done Successfully

The process to check if the port forwarding is done successively to the HTTP server, follow the same instructions as given in the upper section. This happens only in the case of the FTP server. If the port forwarding process is successful, then you can be able to access the web page using the HTTP server without any problem.

All these are the essential steps following which you can be able to accomplish the Asus router port forwarding task. If you fail to perform any of the steps described above or remain unsuccessful in port forwarding, then get in touch with an expert for complete assistance.