Netgear Ready Share Not Working Issue [Solved]

Netgear Ready Share Not Working Issue [Solved]

August 11, 2019 ROUTER 0

The Netgear Ready Share features is used for connecting a standard USB storage device to the router and make it available for the people who want to attach it with the router.

However, at times Netgear ready share stops working which is quite frustrating error.

While you are using an incompatible USB drive, the error can pop up suddenly. Another reason for the occurrence of this situation is a network problem. Also, if you are using an unstable internet connection, you will confront this situation.

Therefore, implement the methods given below to get rid of the error on the go.

Hacks to Resolve Netgear ready share Not Working Issue:

Below is a list of workarounds to resolve Netgear ready share not working issue. We suggest you to try out these troubleshooting steps one by one until the issue is resolved completely.

Fix 1: Reconnect the USB Driver

The first thing that you should do when you encounter the no ready share device detected the issue is to check the USB driver that is installed on your device.

If the driver is not compatible with your device then you need to reconnect the USB driver. To do that, first, you need to disconnect it and then connect it properly.

To do so, perform these steps.

Step 1

First of all, press the Windows key and R key at the same time to launch the Run dialog box.

Step 2

After that, type “//ready share” in the Run box and hit the Enter button to launch the My Network Places section.

Step 3

Thereafter, enter the same location as mentioned in the previous line.

Fix 2: Install the latest version of Firmware of the Router

Netgear ready share USB not working?  Check if your Firmware of the router is in the latest version.

If now, you have to update the firmware into the newest version immediately to support the latest firmware of the Netgear router.

There are some steps involved to update the firmware of the router. Therefore, do the following:

Step 1

First of all, launch a web browser and then visit the official web site of the Netgear. Now, in the driver section, enter the model number of the router to get the fresh firmware of the router.

Step 2

Hit the Enter button and then get the newest version of the firmware of the router. Click on the Download option to get the updated version of the firmware.

Step 3

Save the downloaded file in a particular folder of the C drive. After the downloading process gets completed, move to that folder. Double-click on the downloaded file to install the updated version of the firmware.

After updating the firmware, check whether the problem gets resolved or not.

Fix 3: Check USB Driver Compatibility

If the USB cable is not compatible with our device, you might encounter ready share not showing all files issues. Hence, you need to check the USB cable which is compatible with your device.

In case, if you found that the USB cable is not compatible with your device, you can change it from the official website of the Netgear.

After installing the compatible USB cable, see if the problem still persists or not.

Fix 4: Check the Internet Connection

Netgear ready share USB hub stops working due to the connectivity error. If the network connection is accidentally halted during the updating process, you will confront this annoying situation.

What you have to do is to restart the WiFi router to check if this can resolve the issue. You can also check the USB by extracting it and plug it again.

Final Recommendation

Hopefully, this article is helpful for you and you can easily fix up the Netgear ready share not working issue without any hassle. If you want more tech-related solutions to stay with this website.

Leave a Reply

Your email address will not be published. Required fields are marked *

Call Now Button