Know the Complete Procedure of Linksys re4100w Setup With Easy and Simple Steps

Know the Complete Procedure of Linksys re4100w Setup With Easy and Simple Steps

February 20, 2019 ROUTER 0

Linksys is a well-known brand in our technical market. These wireless routers holds its position among others because of its great connectivity. Linksys re4100W router is a wireless dual-band range extender that enables you to reconstruct the Wi-Fi signal of any access limit or router in order to provide internet connectivity to remote regions with the help of the wireless connection.

If you are a new user of Linksys re4100w wireless router, then you must need to know how to set up this router. In the below article, we are going to discuss the easy procedure of Linksys re4100w setup. Let’s start.

Things You Need to Know Before Going to the Linksys re4100w Setup Procedure


The Linksys re1400w wireless router comes with indicator and buttons at the bottom, side, and front. At the front side of the router, you will see the LED indicator. It helps you by providing the information regarding the updating, power, and as well as the strength of the signal.


  • Blinking green: The indicator started to blink with the green light when it updates the firmware, factory reset, or boot up the device.
  • Solid green: The solid green signal indicates that the router is ready to connect.
  • Solid amber: This indicates the poor signal of the router.
  • Blinking amber: It means that the router is unable to build a suitable connection with the device or it might also indicate some another error.

You can find the audio port to play the music on the left side of the router. The wireless protected setup to securely add and use the cooperative network to the device. The reset button helps to reset back the device if anything accident ever happened.

You will see the ethernet port of the router at the bottom side of the router with a LED indicator. It shows a green color when the ethernet port is attached. The indicator started to blink green when you exchange any data. The ethernet cable primarily attaches the wired devices with the wireless router of an extender.

How to Setup Linksys re4100w?


Stick to the below steps to know the complete procedure of how to Setup Linksys re4100w.

Step 1 :

At first, you need to connect the Linksys wireless re4100w router with a working power supply.

Step 2:

Set the area extender midway between the router and the range without a wireless network. Make sure that you have a minimum 50% of your Wi-Fi signal of the router to set up to run.

Step 3:

Continue by deciding the type of setup you favor. There are two types of setup available:

  • Wireless setup: Wait for sometimes until the indicator becomes solid green at the front side of the chain extender. It could get up to two or three minutes time. On a tablet,  smartphone or computer, connect to the name of the Linksys Extender Setup broadcast network (SSID).
  • Wired setup: Join one head of the ethernet port to the port of the back of the Linksys re4100w router. Then, you need to connect another end with the system.  

Note: Here, you need to keep in mind that the system must need to be connected with the Linksys re4100w only and not attached to the router either wirelessly or wired.

Step 4:

Go to any of the web browsers on the tablet, smartphone, or computer and obtain the web-based setup page of the Linksys re4100w by entering ‘’ at the address panel.

When required the authentication, then you need to left the field of the user name blank. Now enter the ‘admin’ on the Password field and hit on the ‘Login’ or ‘Ok’ button. If you customize the password, then you can enter it.

Step 5:

When you have access the web-based setup page of the Linksys re4100w wireless router, then you need to follow the on-screen directions. When you successfully connect to the wireless network of the router, then you will perceive a confirmation notification. After that, you have hit on the Close button.

Some Additional Steps to Linksys re4100w Setup:

Here, we are going to provide some additional steps for Windows and Mac users.

Windows Users Need to Follow the Below Steps:


At first, click right on the broadcast icon on the system tray. It may seem strange in accordance with the version of Windows we are dealing with. You need to check the available connections and then, click on the Connect button. Now, the Windows will prompt to the page where you will be asked to fill the password. After that, you have to click on the Ok button to connect the router with your device.


Mac Users Need to Perform the Below Steps:


Hit on the Wi-Fi icon located at the upper side of the menu bar. Then, hit on the link which you want to set up. After that, click on the Connect button and fill the password field completely. Then, hit on the Ok button to get a reliable connection.

Hopefully, in the above discussion, we have explained the overall procedure of Linksys extender Setup re4100w. There is no doubt that this will help you to set up the router with your device. If you face any problem in setting up the Linksys router or failing to perform the above steps, then get in touch with an expert to set up your Linksys router without any hassle.

Leave a Reply

Your email address will not be published. Required fields are marked *