Reset Apple AirPort Extreme With Amazing Hacks

Reset Apple AirPort Extreme With Amazing Hacks

February 21, 2019 ROUTER 0

Apple airport extreme is a residential gateway which is combined with router network, switch, wireless access points and as well as contain other important features. The gateway of this product is also known as AirPort Extreme Base Station. You can plug in the USB hard drive into the AirPort Extreme to use it as network-attached storage or which is also known as NAS device for your Mac OS X. Besides that, you can also use it for your Microsoft Windows OS. If you are using the Apple AirPort Extreme and the steps to reset Apple AirPort extreme is unknown to you then, this article is for you.


How to reset Apple airport extreme with easy steps

If you are using the Apple AirPort Extreme or Apple AirPort Express and want to know how to reset apple airport express here are methods which will help you to reset Apple airport express. Keep your eyes on this article to learn the details.

There are several methods that will help you to resolve the problem with ease. There are three different procedure to do so:

  • Soft Reset
  • Hard Reset
  • Factory-default Reset

Now, go through the steps which are mentioned below.


Soft reset

To do it you need to reset the base station passcode and disable the security. Use the Control and RADIUS settings for a few minutes so that you can connect the network to perform the changes. If you want to make no changes then the base station returns to its earlier settings. You should run this to reset if you are unable to control the base station due to the problem with forgotten password. Here we are going to describe the steps in detail:

  • At first, you have to be sure that, if the base station is connected properly with the power supply or not.
  • After that, press and hold the reset button for a few seconds then, release the button. Then, you will notice that the status light on the base station flashes amber.
  • At the next step, connect with the Wi-Fi network which is created by your base station. You can find it from the Wi-Fi status menu in the menu bar.
  • After, completing the above-mentioned steps launch the AirPort option which is located in the utility folder of your Applications folder.
  • Then, click on the base station icon from your AirPort utility. After that, you will find a pop-up menu on your screen. Click on the Edit option from the appearing menu.
  • When, you are done with the above-mentioned procedures now, you have to change the password or you can reconfigure the base station accordingly. After, finishing it click on the Update button.

Hard reset

If you want to use the hard reset, you have to reset the base station to an unconfigured state, but this holds the latest saved configuration and the profiles. This will allow you to replace your base station from the earlier settings. You need to run this reset at the time when the base station is unresponsive. If you do not do this, your problem with the troubleshooting network issues will remain the same. Here are the steps to do it.


Step 1


At first, you have to ensure whether the base station is connected with your power port or not


Step 2

Then, press and hold the Reset button for a few seconds till the status light on the base station flashes the amber rapidly. When the light starts to flash, release the button. Wait for a few minutes for the base station to finish the restart.


Step 3

After that, you have to open the AirPort option. That, you can find it on the Utility folder from the Applications folder

Step 4

At the next step, click on the other Wi-Fi Devices options. After that, you have to select the base station from the appearing list. And then, click on the Edit option.


Step 5

After that, you have to click on the Other Options button. Then, go to the Restore previous settings option and click on the Next option. Keep clicking on it till you get into the final Window


Step 6

When you have done with all the previously discussed methods then, the Apple AirPort Utility will indicate you that the setup procedure is completed. After that, you have to click on the Done option.

Factory-default reset


The factory-default reset method is as same as the hard reset. But, this only deletes the saved configurations and profiles. To run the factory-default reset do the steps mentioned below. If you are exchanging your base station then, this will not delete the data which are stored in your built-in hard drive at the time of Capsule, or on an external hard drive connected toward the base station.

  • At first, you have to disconnect the base station from its power supplying port
  • After that, hold on the reset button and plug in the base station into the power supplier
  • Keep holding the reset button for few seconds till you find that the three status lights are turning on.
  • Then, release the button


The alternative method to reset Apple AirPort Extreme to factory default

Here is an alternative procedure reset Apple AirPort Extreme factory default. Follow the undergoing steps:

  • At first, you have to turn on the router
  • Then, press the Factory Reset button and hold it for  few seconds
  • After that, the device will restart automatically
  • After that, the default settings have been restored in your device. The unit will start to reboot automatically
  • If the power light stops blinking this means the unit has been reset and is ready to use


Symptoms you may notice while performing a hard reset or factory reset

Go through the steps to run the hard reset or the factory-default reset.

  • You should perform the base station at the time when this will request you the IP address by DHCP.
  • You can perform it at the time when the base station password is set to ‘public’
  • Do the hard reset or factory-default reset at the time when base station name is set to ‘base station’ supported by the last six digits of the base station’s MAC which is commonly known as Media Access Control address
  • You can do it at the time when the base station network name is set to “Apple Network,” followed by the last six digits of the base station’s MAC address.
  • Perform it at the time when the base station would not be visible in the Wi-Fi status menu or AirPort option for up to a minute. After that, you will be able to use the device in its default state or you can reconfigure it with the help of AirPort option.

Parting Words

Hope the guide was helpful in providing you with viable solutions to reset Apple AirPort Extreme. If you have further queries regarding this topic then, you can share your feedback with us.

Leave a Reply

Your email address will not be published. Required fields are marked *