Learn How To Change NAT Type On Netgear Router With Simple-To-Follow Steps

Netgear routers are among the best network routers that you can possibly buy. These routers come along with a lot of amazing features to deliver incredible performance. You will be able to get fast internet connectivity at a single click of a button. That is possible because of the advanced technology that these routers have. But still, there are certain features which you want to use them, you will have to tweak your Netgear router a bit, in order to enable. The NAT typesetting is one of them, which you need to change to access certain features. If you want to know how to change NAT type on the Netgear router, then your search for the effective steps ends with us. This article is just for you as it will guide you throughout the process.

But, in order to change NAT type on Netgear router without any sort of adverse effects, you need to have a proper understanding of the finer technical details. You will also get that in this article.

Why There is a Need to Change NAT Type on Netgear Router?

Every network router that you can find, including the ones from Netgear, has certain working protocols. This will involve the internet protocol or the IP address that will come into play with the system functions.

The internet service provider that you have, will assign your Netgear network router an IP address. That will be the particular one for the router only, and it will be fixed from there on.

Then, comes the devices that you will use to connect to the router. In order to get the internet connection, that you want to use, the router will assign them distinct local addresses. Also, it will be able to identify all of them as such.

This process of assigning local addresses to the different connecting devices from the router is what we mean by Network Address Translation, or in short NAT.

When you want to use the internet connection from any of those devices, it makes a request through a particular port of that IP. In case, your Netgear router does not know where to send that to, then the NAT setting of your router will be closed.

To change the setting to open is simple. It is by telling the router where it can send the traffic by forwarding through the ports. Then only, you will have what we can call an open NAT setting.

If you find out how to change NAT type on Netgear router, then you will be able to get a better network connection from your router.

Step By Step Guide on How to Change NAT Type on Netgear Router:

In this section, let’s get into the details of how to change NAT type on the Netgear router. Follow these steps one after the other and then you will be able to change NAT type on router Netgear easily.

• Look for the Start button on your computer home screen, and then click on it.

• Type in ‘www.routerlogin.net’ in the search panel and hit the Enter key.

• The Authentication Required dialogue box will come up. In that, put in your password and click on the Log In button.

• In the next dialogue box that comes up, find and then click on the Attached Devices link on the left panel under the Maintenance section. You will get all the details of the devices behind the router.

• From there, find out the IP addresses of the necessary devices like your computer and other connecting devices. You will have to look into the Device Name category for that information. You will need this information in a later step.

• Now on the left, you will find the link for Port Forwarding/Triggering. Click on it.

Additional Steps to Follow:

After you have found out the link for Port Forwarding/Triggering, then you can go through the below steps:

• Click on the Add Custom Service button. In the Service Name dialogue box that comes up, put in the name of the device that possesses a strict NAT.

• Now, you will have to expand the Protocol box. Then, select the type that the device or the program uses. In case, if you are unaware of the type, click on the Both option.

• In the Starting Port and the Ending Port, type in the port number of the device you are to use. In case, there is a range of ports instead of a particular one, the first port will be the Starting Port and the last port will be the Ending Port.

• Finally, in the Server IP field, type in the IP address numbers and then click on the Apply button.

The Netgear router will now restart and apply this rule. The NAT status of the router from here on will be Open.

This completes the instructional guide for how to change NAT type on the Netgear router. As the instructions mentioned over here are in simple and easy language, hope you will understand them well. Fortunately, you can easily change the NAT type on your Netgear router by going through this article.