Unaware of Netgear Nighthawk X4 AC2200 Setup process? Know the Most Hasslefree Techniques!

Unaware of Netgear Nighthawk X4 AC2200 Setup process? Know the Most Hasslefree Techniques!

March 6, 2019 ROUTER 0

Netgear Nighthawk x4 ac2200 wifi range extender (EX7300) is one of the most popular among the list of wifi extenders. Whenever your Wifi signal is not effective enough to cover up the dead areas or cuts out very often, it is time to devote in wifi range extender. Basically, the main function of the wifi range extender is to deal with the dead areas so that the network connectivity is present at each and every corner of your house.

However, In recent days, most of the router user come up with this query how to setup Netgear Nighthawk x4 ac2200 wifi range extender? In fact, setting up the Netgear Nighthawk x4 ac2200 wifi range extender (EX7300) is not a troublesome task. Therefore, go through the write-up to know the easy and effective methods on the Netgear Nighthawk X4 AC2200 Setup.

Here’s How you can Configure Netgear Nighthawk X4 AC2200 WIFI Range Extender (EX7300):

You might be aware of various types of methods and ways to configure the Netgear x4 ac2200 (EX7300) wifi range extender model. But, you need to try out the most practical and easy methods to execute the configuration process without any disturbance. In case you are unaware of them, here is the guide for you.

Take a look at some effective methods on Netgear nighthawk x4 ac2200 wifi range extender (ex7300) setup are stated below:

Method 1: Wifi Protected Setup

You can use this Wifi Protected Setup (WPS) process to set up the Netgear Nighthawk x4 wifi extender. To do so, you just need to follow below steps.

  1. Before proceeding further, you need to make sure that your router has internet. Wifi protected setup is great to attach over wifi with a push button connect.
  2. At first, you need to plug-in the range extender near your router. After plug-in, the indicator LED light of your device will blink green for a minute while.
  3. After that, you need to wait for the LED light to become amber until moving ahead. In fact, this process can take more than a minute.
  4. To extend the 2.4 GHz network of your router, you need to push the wifi protected setup button of your range extender as well as the wifi protected setup button on the router. If the LED light is blinking amber then, the connection is not yet complete but if the LED light turns to solid green then, the connection is successful.
  5. To extend the 5 GHz network of your router, you need to follow the same way.

  1. Once the connection is done, you need to unplug your device and move your extender to a new location.  
  2. You need to make sure that the location of your Netgear extender must be within the dimension of your network. The connection status LED light helps you to choose the place where the router-to-extender connection is flawless.    
  3. If you are getting a poor or bad connection then, you can put the device closer to your router and check the connection status LED lights.
  4. It can take a minute to boot up after moving the range extender. Till then, you need to check for the LED lights.

Method 2: Configure the Netgear Router using the Netgear Installation Assistant

To extend the wifi network of your router, you can set up the Netgear extender using the Netgear installation assistant as well. Follow the below steps to configure correctly.

  1. At first, you need to turn on your extender.
  2. Once the LED light turns on solid green, you need to connect a device or system with the extender with the help of Ethernet connection or wifi.
  3. After that, you need to launch a web browser to open the Netgear installation assistant.
  4. Now, you need to follow the on-screen directions to attach your extender with your existing network.
  5. Once the connection is done, you need to move your extender to another location which is about halfway between the dead area and your router.
  6. If you are getting a poor or bad connection then, you can put the device closer to your router and check the connection status LED lights.   
  7. Now, you can connect the client devices with your extended wifi network whenever you find the exact and proper location for your Netgear location.

 

Conclusion:

Here we have provided all possible solutions regarding how to setup Netgear Nighthawk x4 ac2200 wifi range extender. Moreover, this article covers easy and useful guidelines on the Netgear Nighthawk x4 ac2200 wifi range extender setup. Try the above-mentioned methods and see which one is giving you the ultimate solution on time. Still, if there is any kind of trouble while executing Netgear AC2200 range extender setup you can post your feedback.

Leave a Reply

Your email address will not be published. Required fields are marked *

eighteen − ten =