A Complete Guidance on How to Fix Router DNS Server Not Responding Error

In today’s technological era, a DNS server is the main parts of the whole system that permits everyone to make a connection with the internet to get access to various sites thereby communicating with the servers. A DNS server helps to translate the web address. But sometimes DNS issue with router might take place. As a result, the DNS server stops responding because of a problem on your router or a problem with the internet connection that you are using. Therefore, if you are encountering router dns server not responding then check out and read this below article. Here are some of the most effective steps to get rid of this error on the go.

Know the Possible Reasons that Leads to DNS Server Not Responding Router Error

Any problem with your router is dangerous. Hence, it is essential to know the exact cause of the error and then eliminate it accordingly. Below listed are some of the possible causes that you should always take care of: Hence, take a look below:

• If the DNS service in your computer is corrupted or not working.
• Due to technical reasons, the server which hosts the website might be temporarily down
• The security firewall or security software itself might have accidentally blocked your PC from communicating with a website or certain websites

Once you have identified the appropriate cause, proceed with the solution part as stated below.

Easy Fixes for DNS Server not Responding Router Error

We understand that it is not always possible to remove the error on your own. This is why we have come up with the most effective steps that will help you to remove the error successfully.

Solution 1: Clear your DNS Cache and Reset your IP

To clean up DNS cache and reset IP, go to the following steps:

1. At first, enter cmd in the run box in the Start app. Then, go to the Command Prompt by right click on it to choose Run as administrator.
2. From the black window, write the following commands and hit Enter.

• ipconfig /flushdns
• ipconfig /registerdns
• ipconfig /release
• ipconfig /renew
• netsh int ip set dns
• netsh winsock reset

1. Then, access the website which you need to visit again. Lastly, do a clean restart your modem and router. And, check the issue once.

Solution 2DNSestart your Modem and Router

If the modem or router can not work correctly, the DNS server suddenly stops responding. If you have to resolve the problem, you can reset router dns settings. Here are some steps on how to reset router DNS settings;

1. Go to your system’s control panel (Start >> control panel)
2. Select Networking and Internet >> View network status and tasks
3. Select change adapter settings.
4. After that, go to the Local Area Connection by right-clicking on it and choose the Properties section.
5. Now, tap on Obtain an IPv6 address automatically and then Obtain DNS servers address automatically too. Then, press OK.
6. Then, choose Internet Protocol Version 4 (TCP/IPv4) and Properties too.
7. Select Obtain an IP address automatically >>Obtain DNS servers address automatically >> OK

Solution 4: Flush DNS And Reset TCP/IP

If you don’t fill up with the proper address in the DNS server, it might create a problem. The other important thing is that you can attach other address by the other ISP or DNS including OpenDNS or Google DNS. To fulfill for applying the process:

1. First, go to system preference and select the Network option.
2. Then, select ‘Wifi’ on the left side.
3. Open ‘Advanced’ folder and go the TCP/IP tab.
4. Now, type the router address somewhere and open DNS tab.
5. Point to be noted that with the router address the DNS server is getting filled up by the correct address.
6. Just tap the (-) mark and add the DNS server address. Finally, you complete the process.

Solution 5: Update your Network Adapter Driver

You have to head over to the device manager folder and drag down to the portion of network adapters. Then go to the active network adapter by tapping on it and tap on the ‘Update Driver’ section. Now, update it If there’s an option to update.

Lastly, you have to reboot the system and access the site which you want to see again.

Solution 6: Change the Physical Address

To modify physical address, follow the steps as instructed:

1. At first, open Windows Start menu, type cmd in the dialogue box and tap on the Enter key.
2. Inside the command prompt, write ipconfig /all and hit the Enter key. Look for the physical address and type it down.
3. After that, again open the start menu, write ncpa.cpl into the run box. Then, hit the Enter button and it will display you the proper network connections.
4. Now go to the active connection which you want to use and go to the Properties section.
5. Next, tap on the Configure option and then go the Advanced tab. Post that, tap on the Network address option and choose the button that shows the Value.
6. Also, write down the network address there which you have typed down before. And, make sure that you type it without no dashes. Then, tap on Ok and reboot the computer.

Solution 7: Run Windows Network Diagnostics

On Windows PCs, Windows Network Diagnostics should be run by diagnosing internet connection issues. If you are sure about the issue, then follow some steps:

1. First, go to the Control Panel.
2. After that, tap on the Network and Sharing Center option.
3. And, go to the Troubleshoot problems below the ‘Change your Networking Settings’ folder.
4. Then go to the ​Internet Connections. When an Internet Connections window shows. Tap on Next.
5. Now, wait for sometimes for troubleshooting tests to finish and notice the Problems found a portion of the window for the exact issue.

Hope this above steps will help you to get rid of the error router dns server not responding. Hence, apply the steps successfully and enjoy hassle-free internet connection. In case of any trouble or confusion, please let us know in the comment section below.