Router Won’t Connect To Internet: Complete Guidelines

Router Won’t Connect To Internet: Complete Guidelines

February 20, 2019 ROUTER 0

The router won’t connect to internet is a common problem faced by almost every users. And the cause of this error is mainly the lack of maintenance of the router. A well-maintained router always works great. Here, in this article, we are explaining the solutions for this issue. Hopefully, after a complete study of this article, you will be able to resolve this problem on your own. So, try to check out every section of this article, to learn how to fix a router that won’t connect to the internet.

How To Fix A Router That Won’t Connect To The Internet?

From the below sections, you can learn the fixes of the router won’t connect to internet issue. So, check out the solutions depending on the brand you are using.

Netgear Router Won’t Connect To Internet

There are several factors which are responsible for this kind of problem. But here, you will get the common methods to fix the router won’t connect to internet problem.

Method 1: Check The Connections

Any loose connection can result in such a problem. So, the method to resolve it is not other than fixing the wires in a proper manner. So, it is always better to keep the router in a safe location. So that no disturbance can take place and can result in this glitch. After connecting every wire properly, turn on both your system and the router. Then,  try to search something using a browser on your system to check if the problem gets sorted.

Method 2: Update Netgear Router Firmware

An outdated version of firmware can also restrict you to access the internet. And, if this is the case, then only by updating the Netgear firmware the problem will get resolved. And the steps to perform this task on Netgear router are as follows.

Step One: Open The Log In Page Of The Netgear Router

At first, know the IP address of your router. Press the Windows button from the keyboard to activate the search bar. Then, on this search bar, type ‘cmd’ and hit the Enter button. This will open the Command Prompt window. On this (Command Prompt or cmd) window, type ‘ipconfig’, and then, tap the Enter button.

After that, from the loaded messages on this Command Prompt window, search the Default Gateway section. The numbers along with the dots present beside to the Default Gateway section is the IP address of the router. Note down this number for further use. is an example of an IP address. Find yours, by following these above process to proceed to this next explaining instructions.

Now, place this IP address on the address bar of a browser. After that, hit the Enter button. This will navigate to the login page of your router.

Step Two: Fill Up The Username And Password And Click On Log In

At the login page of your Netgear router, you will find two blank spaces. Here, you need to fill the proper information. If you have never changed the details (Username and Password) earlier, then enter the default credentials on these empty boxes. The default username is “admin” and the default password is “password”. Otherwise, place the username and password which you set. After filling up with the proper details, click on the login box to enter into your Netgear account.

Step Three: Check For Router’s Update

Then, from this account page, select the Advanced tab. And expand the Administration option from this left-hand side panel. Next, from these available expanding Administration menu, click on the Router Update option. After that, from this right-hand side tap on Check under the Router Update section. Now, wait till it finds any updates. And if there is an update, then this will automatically upgrade the router firmware. As this process gets complete, restart both the system and the router. Now, open a browser and search anything using it to make sure that this problem gets resolved.

Belkin Router Won’t Connect To Internet

If you are using a Belkin router and stuck with this typical problem, then study this section to fix the router won’t connect to internet problem.

Try the exact “Method 1” as explained for the Netgear router to verify if this solves the problem. Further, proceed to the “Step One” of the Method 2 as explained, to open the login page of the Belkin router. Now, from this top-right corner, click on Login. This will open a box where you need to place the password of your Belkin router. If you have changed the password, then fill it up with that. Otherwise, leave it blank. And click on the Submit box.

After that, your Belkin router account will open. Now, from the left-hand side panel of this window, expand Utilities and click on the Firmware update option. After that, click on “Check Firmware” box and Check For New Firmware Version. And wait until the search and the update is complete. As the update gets completed, the router will automatically start the resetting process.

Linksys Router Won’t Connect To Internet

If there is any problem with the internet connection using the Linksys router, then try to follow these below methods.

  • Disable the antivirus software
  • Check all the wires
  • Update the firmware of your Linksys router

Asus Router Won’t Connect To Internet

If you are facing the router won’t connect to internet problem while using the Asus router, then try to follow these methods. Hope, by following these methods, you can get rid of this unpredictable issue.

  • Reconnect the wires of the router
  • Update the firmware of the router
  • Run a full scan of your system to fix the virus issue, if any
  • Try a different browser

Hope this article helps you to learn all the methods to fix the issue on your own.

Leave a Reply

Your email address will not be published. Required fields are marked *