Know How To Setup A Network Switch And Router

Know How To Setup A Network Switch And Router

March 1, 2019 ROUTER 0

If you want to connect all the devices with the same network so that you can quickly share files and use the same internet connections, then you need a networking device. In this context, routers are the most favorable option available. However, a network switch is a less costly choice that can work the same as the router. Accordingly, if you are wondering how to setup a network switch and router, then we can help you out. Just read this article to get detailed information regarding setting up a network switch.

Specifications of a Network Switch

A network switch is generally known as the multiport network bridge which connects some devices together. It controls the flow of data across a network by transmitting and receiving a network packet. Now, the question is how does it work? Usually, a network switch addresses the data and forwards it at the data link layer. Sometimes, if you configure the network switch with the router, then it also forwards the data at the network layer.

The network switch has also different nodes and those communicate with each other in a smooth way. At present, the Ethernet cable is the most common network switch. It raises its speed up to 10 GHz.

Specifications of a Router

The router is a networking device which distributes the data packets between the computer networks. It is mainly used for connecting networking devices with the internet so that multiple users can share the same connection. Further, a router works as a dispatcher. It directs the data traffic from the modem and after that routes it to multiple devices.

 

Routers use a lot of protocols, such as Internet Control Message Protocol for communication by designing the best path between any two hosts. Most of the routers have four Ethernet ports that allow the users to plugged in four devices at a time. In case, you want more than four Ethernet ports, then what you need is to update your router with the larger port bank. This way, you can configure your router up to eight ports or you can use a network switch. Now, let’s learn how to setup a network switch and router.

How to Setup a Router and Network Switch with Some Effective Steps

If less than four devices use a single network, then you can use only one router for connecting with the modem and don’t need to expand the network. However, if the number of devices is more than four, then you need a network switch. With the help of the network switch, you can expand the number port of your router. By using a network switch you can configure multiple numbers of ports, such as 8 ports, 16 ports, and 32 port. Now, let’s have a look at the steps to do so and learn how to setup a network switch and router..

Step 1

In the beginning, you have to unplug all the power supplies of the router, network switches, and the cable modem.

Step 2

Now, you have to connect the modem with the telephone wire. Then, you need to connect the one end of the Ethernet cable with the Ethernet port which is located at the back of the modem.

Step 3

After that, you should plug the other end of the Ethernet cable which is connected with the modem into the WAN port of your router.

Step 4

You have to use another Ethernet cable to connect with any of your LAN port. Once you are done with that, then you should plug the power supplies of these three devices.

After the set up is completed, you can connect more than four devices in your router. Keep in mind that, you should connect the additional devices with the switches normal by using Ethernet cable.

Conclusion

We believe with all the information which are given above, you can understand each and everything about how to setup a network switch and router. In case, you don’t have much technical knowledge, then we recommended you to take expert help and follow their instructions.

Leave a Reply

Your email address will not be published. Required fields are marked *